8ft Taper Fitted Dye Sublimated Table Throw

Description

Want to avoid trips, snags or having your table throw pull off in high foot traffic areas?

Then this 8ft taper fitted throw may be what you’re looking for.

Why? Well, imagine if you’re in a bustling event, retail, craft fair, or trade show booth area or environment.

And you’re showcasing some of your products, wares, food and or even running a video presentation loop on a monitor on your table top.

And its sitting on top of a full-draping throw. Not a taper fitted one.

And someone waltzes by and snags their boot tip or heel on the draping throw.

And suddenly, without notice, they accidentally drag or yank the throw off center or even off the table?

What do you think is going to happen to your product displays and or video monitor player?

Could they possibly come crashing down to the floor when pulled over the edge of the table?

This is why a tapered table throw may be the better choice.

After all, each side neatly cut (taper) inward toward the display tables support feet.

Which eliminates the potential for snagging accidents.

Plus you gain a much more defined and clearer presentation of your dye subbed imagery on all 4 sides.

Which means, these taper fitted throws are also great for retail, midways, feast, and special promotions.

Because you can set and forget them. And not worry about accidents happening.

And when used in a trade show setting, they present a more professional appeal.

How? Well, look at the sides. Unlike the full draping throws which bunch-up around the corners, and the ground, and limit presentation visibility, the taper fitted throw eliminates all that.

And gives you 100% visibility.

Which means your dye subbed imagery, messaging, branding and logos will stand out more.

They’ll be visible from all sides and all directions.

So the taper fitted throw offers you more banding for your buck.

And it’s dye subbed under color bursting heat.

Which means your imagery is going to crisp, clear, vibrant, and visually appealing.

So how do you design the throw?

Have your graphic designer or design team layout your artwork, message, imagery, and logos in the downloadable design template (see template in product listing above.)

If you’re going to add a stunning looking theme, like having all 4 sides showcase a bamboo forest, then just make sure to line up the imagery on the inset stitch lines in the design template. And it will look like a bamboo forest is growing out of the floor!

Or if going for the Corporate look. Where you want your dye sublimated message, slogan, USP, and or logo on your tapered throw, then your good too. Just have your designer work their magic.

But if you’re concerned about brand colors, then simply provide your Company Pantone Coated Color Matching (PMS) call out colors with your layered art-files. And showoff your brand colors in style.

Denver Display will dye sub your design graphics(s) to spec.  And if your designer provides (uploads) art-work, as recommended, at 100-120ppi at size? Oh my, your dye sub imagery is going to be spell binding.

Plus, Denver Display proofs your design(s) at actual size. And provides you with a digital proof for your approval -prior to producing your 8ft taper fitted throw(s).

Once you approve the proof(s), you’re good to go.

Your 8ft taper fitted table throw will ship and arrive as promised.

Plus, your custom table throw is fire rate to code. Which means the show host or show decorator will not be removing your throw during their final inspection.

And to make your life more easy, you’ll get Denver Displays’ 60 day table throw warranty.

Which means your 8ft taper fitted throw is warranted to free of production defects for 60 days. Which means the reinforced stitch edging will hold up just fine. No ravel, no fray.

And the best part is, your taper fitted trade show table throw is hand washable or dry-cleanable.

Plus, you may even use a cloth streamer on the throw to remove fold lines and crunched-up, quickly packed, show to show, wrinkles.

However, as a recommended rule of thumb, if you’re going for the brand color matching look, for your entire exhibit display booth or store aisle or showroom area, then consider using Pantone Matching Colors like this…

If you have other tension fabric or pop up dye sub fabric displays in your show booth, craft booth, or aisle area… then consider using a different brand color combinations on your table throw design.

For example, let’s assume you have a dye sub fabric backdrop which is flooded with a ‘purple’ PMS coated call out color with white text, then reverse the color scheme on your 8ft taper fitted throw. And design your throw with a white background and your ‘purple’ Pantone coated call out color text.

Why? Well, your tapered throw is dye subbed on a silky sheen display poly. This fabric is different from other display fabrics.

Which means, if Denver Display dye subs your exact Pantone coated color ‘purple’ call out on an 8oz tension fabric display… then your colors may appear to be slightly different… even though they are the same color?

Why? Well, your throw fabrics silky sheeny nature will refract light differently then a heavy 8oz tension fabric will.

Which means, your fitted throw will appear to be a brighter color ‘purple’. Because the light refracts differently off different fabric substrates.

Therefore, if you place your throw next to another dye sub fabric display, the colors will present the illusion that they are not exactly the same color.

Therefore, by simply mixing up the your throw color designs… allows you to maximize your overall visual presentation.

And if you’re pondering, this is standard in the industry. But who else is advising you of the potential for slightly off-color visuals?

So, if you want to look prominent… Why not order your 8ft taper fitted dye sublimated table throw today.

And look like you belong.