10ft Modulate Kit 03

Description

If you’re an exhibitor or promoter or marketing manager…who is showcasing or demoing products and or services more than once a year then why not consider a reconfigurable straight back wall modulate display kit 03?

Why?

Imagine you’re traveling around the country.

And you’re exhibiting or promoting your company wares at different venues or conference halls every month.

And let’s say some of your shows or conferences you’re promoting at are both large and small.

Where one may be in a large trade show hall and another in a small hotel resort ball room.

And for the larger trade show exhibition you go with a 10×10 show booth space…

For the smaller ballrooms and conference centers you go with an 8×8 space. And so on…

So instead of having a different type of show booth display backdrop for every type of booth size… you go with this reconfigurable modulate display back wall kit 03.

Think about it.

The modulate kit 03 comes in 3 sections.

Where the left and right top arching sections are a little over 3 1/2 feet wide.

Added together they’ll span over 7 foot in width -this will fit nicely in the back of an 8 foot booth space.

And then if you have a 10×10 space your center section, which is slightly over 2 1/2 feet wide, will fit right in between both arching side sections to make up approximately a 10 foot overall width.

Heck, the center section may even act as a stand alone section in your lobby and or retail space as a POP display when you’re not on the road.

After all, it’s width is similar to that of a banner stand. Plus at approximate 93″ tall, and being produced from color-rich dye sub taunt fabric, it will be an eye-catcher from all vantage points.

But the best part is…

Each modulate frame, which makes up each section, attaches to the other sections magnetically. Therefore it’s easy to scale your back wall size up and down from show to show.

Plus, since this modulate kit 03 is made up of three straight sections, it maximizes your floor booth or stand space more effectively, especially if you want more space to provide product demos or even handle multiple meet and greets.

And if you ever go big. Like increase your booth size up to a 20×10 or 20×20, then you may order add modulate sections to your existing sections to fill up the space. Even create storage rooms in your booth, dividers and all of it.

But what’s really cool is these sectional modulate wall system widths are not that wide -by themselves.

Which means they are easier to handle and assemble than those 8′, 10′, 15′ or even a 20′ walls.

And when you add the protective wheeled case to your order they are easier to ship and transport.

However, if you think about it…

This modulate back wall kit 03 is rather unique.

Which means, it’s not like those typical square or rectangular back walls.

Thus, you look different than everyone else.

And by projecting a different look of appeal, you can’t help but attract more attention.

So no matter what your offering, demoing, pitching, marketing or showcasing…

This modulate kit 03 may be ideal for you.

For example, some other uses for this kit 03, besides a trade show or conference, maybe for a…

• Traveling job fair
• Craft fair booth
• Taste test new product
• Introduce a new product
• Showcase a service
• Giveaway free samples
• Book signing
• Garner signature stand
• In-store POP
• Promoting products on midway
• And so much more

Plus, since each of your sections are skinned with a vibrant dye sub color pillow zipper bag graphic you’ll be rest assured your imagery will be taunt, wrinkle free and crisp.

At the same time, since your imagery is blasted into your fabric at 425 degrees your stretch fabric faces with not run or bleed if they get wet. (Just let them dry before re-packing)

And you may cold water wash and even dry clean if they get a bit dirty.

You may even use a cloth steamer on your fabric faces if you have had them folded up for long periods of time.

Plus your modulate kit 03 is fire rated to code -so you’ll enjoy displaying your backwall just about anywhere you go.

So, if you want to be able to mix and match back wall sections from show to show or conference to conference then this modulate kit 03 will be ideal for you.

Just have your design team (or hire one of our designers) think about how each section may be utilized as one huge 10′ wall or in sections.

And design accordingly.

So go ahead… get a crisp, clean and appealing reconfigurable back wall today.

Add this modulate kit 03 to your cart right now.

Then have a wonderful time showing off your wares, products, services, promos, demos and marketing message too.

Order yours today.

Have a great showing.