2.5ft Straight SEG (1×1 Quad) Pop Up Tabletop Display With End Caps

Description

Why would you want one of these 2.5ft straight SEG (1×1 quad) pop up tabletop display with end caps?

Well, sometimes a finishing touch may go along way towards increasing your exhibiting success rate.

For example…

Imagine you’re an exhibitor at a yearly industry trade show.

And like the years prior, it’s going to be a doozie.

So you sign up for a typical 10×10 show booth space to exhibit your wares.

A booth space which is packed-in along an expansive aisleway -on the show venue floor.

Where you have exhibitors to the left, and right, and across from you -all babbling for attention.

Yet, most of the booths are set up with a typical backdrop wall and a show booth table.

Sure, a select few added some pull up banners.

And some even spared no expense and went with a backlit display.

However, almost every inline exhibition booth on your aisle went with a typical 6′ show booth table.

A standard trade show table and a few chairs which is included in the standard show contract.

And just about every table had a standard throw.

Either a dye sub throw which brands the space or the typical plain draping throw… which comes with the space.

Now… imagine you’re gazing down your aisleway before the venue doors fly open.

And as you gaze… you notice near conformity.

Where almost every booth space appears to align visually (booth back wall and table, booth back wall and table, etc).

Okay, now image if you went for the finishing touch.

A way to tilt the attraction advantage in your favor.

A way to reel-in a few more active buyer attendees into visiting your booth.

A subtle way to increase your show success.

Because you know, by meeting the right people at your yearly show can provide life altering results.

So you add one of these 2.5ft straight, SEG, 1×1 quad pop up tabletop displays with end caps on your show booth table.

And you choose this premium, edge to edge, SEG (Silicone Edge Graphic) dye sub push fit graphic face and end caps because your tabletop display is up close and personal.

You want to place your best foot forward, so to speak, and look your best.

You want a color rich fabric print which is seamless, crisp, clean, radiant, and vibrant. You want to project professional appeal.

After all, the last thing you want is to look cheap, right?

And now when you view your aisle way, before the crowds stampede-in, you suddenly notice your show booth space.

A space which is, sort-ah, off in the distance. 7 booths down and on the left.

But you stand out like sore thumb.

Which means your 2.5ft by 2.5ft SEG dye sub tabletop pop up display stands out. Is highly visible. And gives you added pulling power.

And if you take a standard show booth table at 30 inches tall and add the 2.5ft pop up -your overall height of your table top display reaches a tad bit over 5ft tall. Which is right about shoulder level for most folk.

And is easy to spot verses trying to catch a table throws branding… which is center about 6 inches off the ground, right?

So, hey, can a small investment in a premium grade table top pop up display pay off in a big way?

Well, what’s the value of landing one new account, or two, at your upcoming show?

But, it’s your call.

If you want to stand out a little bit more, gain more attention, then this premium grade SEG pop up tabletop display is right for you.

So why not add this 2.5ft by 2.5ft straight SEG, 1×1 quad, push-fit fabric face, dye sub, tabletop pop up display with encompassing professional looking end caps -to your order right now?

Gain an edge today.

You seldom know, whom you may attract -that may otherwise stroll, right on by.

So grab a 2.5ft straight SEG (1×1 quad) pop up tabletop display with end caps now.

And have a rewarding show.

P.S.  Oh, by the way, you may also want to upgrade your order by adding the option for protective wheeled case.

Why?

Because a molded shipping and storage cases will protect your investment for years to come.

Plus, when you arrive at your venue, you may waltz right in the front door and wheel-in your 2.5ft tabletop pop up display to your exhibition space.

You then pop the case lid. Pull out your collapsible frame, channel bars, seamless fabric face and end caps.

Then quickly setup your SEG table top display.

You’re ready to go.

However, what’s really cool is you may turn your now empty wheeled-in case into a branded show booth counter.

Huh?

Yea, just order another add-on upgrade option for the case to counter conversion graphic.

That’s right, a dye sub pull over stretch fit fabric bag graphic.

A bag graphic which slips over your case -and zips right up.

Which means, you transform your wheeled-in cases into show booth counter.

Thus, you eliminate the need to lug your empty case around. Or take it back to your room… or worse, pay for storage.

Nope… Your branded molded case stays within your 10×10 exhibition space and doubles as a counter.

Plus, when the show ends, your wheeled case is right there, in your booth.

You simply pack up your collapsible 2.5 ft pop up tabletop display without having to scurry back to your room or wait on anyone.

And it’s protected from being damaged.

So if you added the option for a wheeled protected molded case and you want to turn that case into a show booth counter, then check out the case to counter graphic option today.

See here for case to counter stretch wrap add on and or call Denver Display for battle tested expert help today.

Have a wonderful showing.